| Q&A about the Tipsbite |
|
|
|
|
|
|
About the Product & Installation
a, What's the function of the product?
=> ① oral cavity enlarging ② tongue protection
③ suction ④ intra-oral illuminating
b, How to connect the product to the dental chair?
=> Directly connect the suction hose of the product to the suction line of the dental chair.
①Both the high speed & the low speed are ok.
②We recommend to connect to the low speed suction line.
c, What's the warranty？
=> 1 year.
d, What includes in one set?
=> 1 handpiece ; 1 LED
2 biteblocks(large&small) : use both sides
4 tips(large:left&right, small:left&right)
1 operation control part/connection hose ; 1 adaptor
1 cleaning brush ; 1 Y-connector ;TBC-Connector
e, How many sizes of the biteblock and tips?
=> Both the biteblock and the tips have two size with large and small.
f, What's the package size and weight?
=> size: Length 550mm X width 200mm X height 55mm,
weight: 1.2Kg |
About the Sterilization
a,Which part can be sterilized in autoclave?
=> ① handpiece(after removing the LED)
② biteblock
③ tip
b, Is there any disposable part?
=> ① Biteblock is only autoclavable.
② Tip is selected. (autoclavable & disposable)
c, How to sterilize the product?
=> Sterilize it in the Autoclave.
① Handpiece,biteblock and tip(autoclavable) are available in the autoclave.
② There are two kinds of tip,one is disposable,the other one is autoclavvable.
③ Autoclave sterilization regulation is subject to general stipulation on sterilization.
(Ex) Sterilization at 135℃ for 3 minute, Sterilization at 120℃ for 20 minute.
Caution:
While sterilizing handpiece in the autoclave,sterilize it after splitting from operation control part and removing LED. |
About the L.E.D
a, What's the power source?
=>Directly connect the power adaptor to the AC power.
※ Power Adaptor
① Input: AC 100~240v
② Output: DC 4.5v
b, Can L.E.D be removed from the handpiece?
=> Yes, it can be removed from the handpiece.
c, What’s the lifetime of L.E.D?
=>Its lifetime is 50,000 hours.
d, Is the brightness stable during the use?And is there any heat during the long use?
=> Yes, the brightness is basically stable. The tolerance is within 5%.And there is no heat during the long use.
e, How to control the brightness of the L.E.D?
=> Control the brightness of the LED by continuing to press the switch upon power ON.
※ Brightness is gradually adjusted by 3 steps such as " Low-Medium-High-Medium-Low-Medium".
f, What's the L.E.D luminance?
=>The luminance is about 5,500Lux~8,000 Lux.
g, Can the L.E.D be purchased separately?
=> Yes.
h, Will the composite materials which are put in the cavity be sensitive to the light?
=> No,the light is not the curing light.It has no effect on the composite materials. |
About the suction
a, How to operate suction lever?
=> Suction valve is independently opetated between the right and the left.If the lever is pushed in the direction to left upper,it is opened.
For the right side,on the contrary to the left side,it is closed if the lever is pushed up,and it is opened if the lever is pulled down.
b, How to operate suction switch?
=> While in a surgical operation,suction valve equipped in tips direction becomes the operation valve.
c, What's the advantage of the suction?
=> ① Doctors can treat without the help of the nurses.
② The patients can feel comfortable during the treatment.
Caution:
If the opposite suction valve is opened, functional effect on suction is significantly lowered.
For normal suction,right and left lever head for the opposite direction. | |
